ESP32-C3 LUATOS LuatIDE Micropython USB-C Entwickler Board

8,55 10,76 

ESP32-C6 WiFi 6 BL 5.3 Zigbee dual USB-C ESP32-WROOM-1 N4R2 CH343 USB TTL Entwickler Development Board

Beschreibung

ESP32-C6 WiFi 6 BL 5.3 Zigbee dual USB-C ESP32-WROOM-1 N4R2 CH343 USB TTL Entwickler Development Board

ESP32-C3 LUATOS LUA Tools Micropython Development Boards © androegg

ESP32-C3 LUATOS Development Display Extension Board © androegg

 

ESP32-C3 LUATOS LUA Tools Boards wie folgt verfügbar:

  • 1 Stück ESP32-C3 LUATOS CH343 USB TTL Entwicklerboard, inkl. 2 Stück Pinleisten
  • 1 Stück ESP32-C3 LUATOS Entwicklerboard, inkl. 2 Stück Pinleisten
  • 1 Stück IPS80x160 weisses Display Board Erweiterung, , inkl. 2 Stück Stecksockel

 

Die ESP32 LUATOS LUA Tools Entwicklerboard basieren auf dem ESP32 C3 Core von Esspressif in Kombination mit 4MB Quad SPI Flash. Das ESP32 LUATOS Enwticklerboard ist dabei

  • mit integriertem CH343 USB TTL Konverter
    sowie
    zur direkten Verwendung der LuatIDE
  • ohne USB TTL Konverter, zum Betrieb mite einem externen USB TTL Konverter, typischerweise zur Verwendung von Luatools (keine Unterstützung der LuatIDE)

verfügbar.

Die generelle Spannungsversorgung erfolgt dabei über eine integrierte USB-C Schnittstelle.

Das ESP32-C3 LUATOS LUA Tools Entwicklerboard unterstützt

  • 802.11 b/g/n Standard
  • HT40 WLan Transceiver
  • Bluetooth bis 4.2
  • Takfrequenz 160MHz
  • SRAM 512kBytes
  • 4MB 32Mbit SPI Flash
  • 32 Pin
  • unterstützte Schnittstellen
    SPI SD Karte,
    UART,
    SPI,
    SDIO,
    I2C,
    LED PWM,
    Motor PWM,
    I2S,
    IR,
    pulse counter,
    GPIO, capacitive touch sensor,
    ADC 12-bit,
    DAC,
    Two-Wire Automotive Interface (TWAI®), compatible with ISO11898-1 (CAN Specification 2.0)

ESP32-C3 Display Erweiterung

Passend für für die ESP32 LUATOS LUA Tools Entwicklerboards ist das IPS80x160 0,96 inch Display Erweiterungsboard verfügbar. Das IPS80x160 Display Board verfügt über:

  • integrierten ST7735S Treiber IC
  • Joystick Button zur Benutzereingabe
  • passende Stecksockel für ESP32 LUATOS

Entwicklerboards

ESP32-C3 LUATOS LUA Tools boards available

  • 1 pcs. ESP32-C3 LUATOS CH343 USB TTL Development Board, incl. 2pcs. Pinheader
  • 1 pcs. ESP32-C3 LUATOS Development Board, incl. 2pcs. Pinheader
  • 1pcs. IPS80x160 white Display Extension Board, incl. 2pcs. Pinsocket

 

TheESP32 LUATOS LUA Tools are based on ESP32 C3 from Esspressif in combination with a 4MB Quad SPI Flash. The ESP32 LUATOS Development Board is available

  • with integrated CH343 USB TTL Converter, supports direct use of LautIDE
  • without USB TTL Converter for external USB TTL Converter, LuatIDE not supported

 

The 5V main power supply is supported thru USB-C Socket.

The ESP32-C3 LUATOS LUA Tools Boards supports

  • 802.11 b/g/n Standard
  • HT40 WLan Transceiver
  • Bluetooth up to 4.2
  • Frequency 160MHz
  • SRAM 512kBytes
  • 4MB 32Mbit SPI Flash
  • 32 Pin
  • supported Interfaces
    SPI SD Karte,
    UART,
    SPI,
    SDIO,
    I2C,
    LED PWM,
    Motor PWM,
    I2S,
    IR,
    pulse counter,
    GPIO, capacitive touch sensor,
    ADC 12-bit,
    DAC,
    Two-Wire Automotive Interface (TWAI®), compatible with ISO11898-1 (CAN Specification 2.0)

ESP32-C3 Display Extension

The 0.96 inch IPS80x160 provides:

  • integrated ST7735S Driver IC
  • Joystick Button for User input
  • Pinsockets for ESP32 LUATOS

Development Boards

ESP32 LUATOS development board
  • small form factor
    • Length 51mm
    • Width 21 mm
  • 5V Power Supply thru USB-C Connector
  • 2 Versions available
    • with CH343 USB TTL Converter on board
    • without TTO Converter
  • CPU / MPU:
    Frequency: up to 240 MHz. based on Tensilica LX6 microcontroller with 600 DMIPS
    up to 600 DMIPS448 KByte ROM size
    520 KByte SRAM size
  • 4MB Quad SPI Flash:
    Flash memory: 32Mbit
    clock frequency: 75 MHz.
    Page program: up to 256 bytes in 0.64ms (TYP) Sector erase: 512Kb in 0.6s
    Bulk erase: 17 – 23 s
    Hardware write protection: protected area size defined by nonvolatile bits BP0, BP1, BP2
    Deep power-down: 1μA (TYP)
    Write Cycles: > 100,000 write cycles per sector Data retention: > 20 Years
  • 802.11 b/g/n/e/i protocol
  • supports Wi-Fi Direct (P2P)
  • soft-AP Integrated TCP/IP protocol stack
  • 802.11 n (2.4 GHz), up to 150 Mbps
  • 802.11 e: QoS for wireless multimedia technology
  • Block ACK
  • Fragmentation and defragmentation
  • Automatic Beacon monitoring/scanning
  • 802.11 i security features: pre-authentication and TSN
  • Wi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS)
  • Infrastructure BSS Station mode/SoftAP mode Wi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2P Power Management
  • UMA compliant and certified
  • Antenna diversity and selection
  • Compliant with Bluetooth v4.2 BR/EDR and BLE specification
  • deep sleep current of < 2.5uA
  • Class-1, class-2 and class-3 transmitter without external power amplifier
  • Enhanced power control
  • +10 dBm transmitting power
  • NZIF receiver with -98 dBm sensitivity
  • Adaptive Frequency Hopping (AFH)
  • Standard HCI based on SDIO/SPI/UART
  • High speed UART HCI, up to 4 Mbps
  • BT 4.2 controller and host stack
  • Service Discover Protocol (SDP)
  • General Access Profile (GAP)
  • Security Manage Protocol (SMP)
  • Bluetooth Low Energy (BLE)
  • ATT/GATT
  • HID
  • All GATT-based profile supported
  • SPP-Like GATT-based profile
  • BLE Beacon
  • A2DP/AVRCP/SPP, HSP/HFP, RFCOMM
  • CVSD and SBC for audio codec
  • Bluetooth Piconet and Scatternet
Pin description

Numbering name Default function after reset Multiplexing function power domain Up and down ability
32 GND ground
31 5V 5V power interface, connected to VBUS of USB
30 BOOT GPIO09, input BOOTMODE VDD3P3_CPU UP/DOWN
29 IO08 GPIO08, input, output, high impedance PWM04 VDD3P3_CPU UP/DOWN
28 IO04 GPIO04, input, output, high impedance I2C_SDA/ADC_4 VDD3P3_RTC UP/DOWN
27 IO05 GPIO05, input, output, high impedance I2C_SCL/ADC_5 VDD3P3_RTC UP/DOWN
26 3.3V Chip power supply, 3.3V
25 GND ground
twenty four PB_11 GPIO11, input, output, high impedance VDD_SPI VDD3P3_CPU UP/DOWN
twenty three IO07 GPIO07, input, output, high impedance SPI0_CS VDD3P3_CPU UP/DOWN
twenty two IO06 GPIO06, input, output, high impedance PWM01 VDD3P3_CPU UP/DOWN
twenty one IO10 GPIO10, input, output, high impedance PWM03/SPI0_MISO VDD3P3_CPU UP/DOWN
20 IO03 GPIO03, input, output, high impedance SPI0_MOSI/ADC_3 VDD3P3_RTC UP/DOWN
19 IO02 GPIO02, input, output, high impedance PWM02/SPI0_CK/ADC_2 VDD3P3_CPU UP/DOWN
18 3.3V Chip power supply, 3.3V
17 GND ground
16 5V 5V power interface, connected to VBUS of USB
15 PWB Chip 3.3V power supply control, active high level, can be left floating if not needed
14 GND ground
13 3.3V Chip power supply, 3.3V
12 RESET Chip reset VDD3P3_RTC
11 NC
10 IO13 GPIO13, input, output, high impedance VDD3P3_CPU UP/DOWN
09 U0_RX GPIO20, input, output, high impedance UART0_RX VDD3P3_CPU UP/DOWN
08 U0_TX GPIO21, input, output, high impedance UART0_TX VDD3P3_CPU UP/DOWN
07 GND ground
06 IO19 GPIO19, input, output, high impedance USB_D+ VDD3P3_CPU UP/DOWN
05 IO18 GPIO18, input, output, high impedance USB_D- VDD3P3_CPU UP/DOWN
04 IO12 GPIO12, input, output, high impedance SPIHD VDD3P3_CPU UP/DOWN
03 IO01 GPIO1, input, output, high impedance UART1_RX/ADC_1 VDD3P3_CPU UP/DOWN
02 IO00 GPIO0, input, output, high impedance UART1_TX/ADC_0 VDD3P3_CPU UP/DOWN
01 GND ground

Zusätzliche Informationen

Modul

LuatOS + CH343 TTL, LuatOS, 0.96 Display Extension

Bewertungen

Es gibt noch keine Bewertungen.

Nur angemeldete Kunden, die dieses Produkt gekauft haben, dürfen eine Bewertung abgeben.